Type the IP address, in dotted decimal format, for which to search.
To cancel and not search for an IP address, click here.
To search for map objects assigned the specified IP address, click here.
Begin poll/monitor on data file open is selected. LANsurveyor will automatically start polling and/or monitoring in any poll or monitor lists present in a data file.
Begin poll/monitor on data file open is off. LANsurveyor will not start polling or monitoring in any poll or monitor lists when a data file is opened.
Don't open TCP/IP or MacTCP is on. LANsurveyor will not open the TCP/IP (Open Transport) or MacTCP (Classical) drivers when it starts up.Use this option if you do not want to use the TCP/IP features of LANsurveyor, especially if you have a PPP connec
Don't open TCP/IP or MacTCP is off. LANsurveyor will open the TCP/IP (Open Transport) or MacTCP (Classical) drivers when it starts up.
Use DNS to map IP addresses is on. This option instructs LANsurveyor to query your local Domain Name Server to assign IP addresses to map objects. Use of this option will greatly increase your network search time.
Use DNS to map IP addresses is disabled because your Macintosh does not have MacTCP or OpenTransport installed.
Use DNS to map IP addresses is off. To instruct LANsurveyor to query your local Domain Name Server to assign IP addresses to map objects, click here. Use of this option will greatly increase your network search time.
Use extended router search is on. This option instructs LANsurveyor to use extra SNMP and NBP queries to identify unknown routers. Use of this option will increase your network search time.
Use extended router search is off. To instruct LANsurveyor to use extra SNMP and NBP queries to identify unknown routers, click here. Use of this option will increase your network search time.
Search for old FastPaths is on. This option instructs LANsurveyor to specifically search for FastPath models 1, 2, or 3. Use of this option increases your network search time.
Search for old FastPaths is off. To instruct LANsurveyor to specifically search for FastPath models 1, 2, or 3, click here. Use of this option will increase your network search time.
Combine routers that are connected to identical AppleTalk nets. This option instructs LANsurveyor to treat all routers connected to the same nets as being the same router.
Combine routers that are connected to identical AppleTalk nets. To instruct LANsurveyor to treat all routers connected to the same nets as being the same router, click here.
Combine routers with same name is on. This option instructs LANsurveyor to treat all routers with the same name as being the same router. Turn this option off if many of your AppleTalk routers have the same name and you would like them displayed as s
Combine routers with same name is off. To instruct LANsurveyor to treat all routers with the same name as being the same router, click here.
Always collect end nodes is on. It instructs LANsurveyor to build maps which include end node objects (Macintosh computers, printers, modems, etc.)
Always collect end nodes is off. To instruct LANsurveyor to build maps which include end node objects (MacOS computers, printers, modems, etc.), click here.
The Neon Password is sent whenever a responder query is sent to a map object running the Neon Responder. Change this password after changing a Neon Responder's password using the Change Password manage command.
The DDP/UDP SNMP Community String is the text sent with each SNMP query sent to a map object that is an SNMP Agent and does not have an assigned IP address.
The IP/UDP SNMP Community String is the text sent with each SNMP query sent to a map object assigned an IP address. Change this string to query objects that have the community string configured for use as a password.
The SNMP query timeout is how long LANsurveyor will wait for responses from network objects when using the Simple Network Management Protocol (SNMP) to query for information. Increase this value to allow slow responding devices to reply.
The Search query timeout is how long LANsurveyor will wait for responses from network objects when querying or searching your network. Increase this value for network objects that are many hops away as they may not respond in time.
The Retry count indicates how many times AppleTalk NBP lookup packets will be sent. If you have many AppleTalk services registered within a particular zone, increase this value so that more requests are made and more services are likely to respond.
The Retry interval indicates the number of ticks (1/60th of a second) between AppleTalk Name Binding Protocol (NBP) lookup packets. Increase this value to accomodate network objects that have to respond over long distances or slow network links.
To cancel and leave Network Options untouched, click here.
To save changes in Network Options, click here.
This alarm condition is checked. It will instruct LANsurveyor to alert you when it finds a responsive map object in the set number of times.
This alarm condition is off. To instruct LANsurveyor to alert you when it finds a responsive map object in the set number of times, click here.
To choose how to be notiifed when a map object becomes unresponsive, click here.
This alarm condition is checked. It will instruct LANsurveyor to alert you when it finds an unresponsive map object in the set number of times.
This alarm condition is off. To instruct LANsurveyor to alert you when it finds an unresponsive map object in the set number of times, click here.
The Polling rate indicates how many times LANsurveyor will ask an object to respond, and can be set to any value. Click on the up and down arrows to get the desired value.
The Polling rate indicates how many times LANsurveyor will ask an object to respond, and can be set to any value. Click here to change the second value setting.
The Polling rate indicates how many times LANsurveyor will ask an object to respond, and can be set to any value. Click here to change the minute value setting.
The Polling rate indicates how many times LANsurveyor will ask an object to respond, and can be set to any value. Click here to change the hour value setting.
The Polling rate indicates how many times LANsurveyor will ask an object to respond, and can be set to any value.
To cancel and leave all Node Polling Options untouched, click here.
To save changes in Node Polling Options, click here.
Enter the traffic threshold for LANsurveyor to alert you when it finds a responsive object, when either transmitting or receiving traffic, exceeds that set value.
To choose how to be notified when if a map object becomes unresponsive, click here.
To choose how to be notified when if a map object either exceeds the pre-set traffic rate, click here.
Set the number of times LANsurveyor should try to contact an unresponsive map object before it alerts you.
Selected so that LANsurveyor alerts you when it finds an that an object does not respond in the number of times set.
To allow LANsurveyor to alert you it finds an that an object does not respond in the number of times set, click here.
To be alerted when LANsurveyor finds a responsive object whose traffic rate, when either transmitting or receiving traffic, exceeds the set value, click here.
The Monitor rate indicates how often LANsurveyor will send an SNMP request and wait for map object to respond, and can be set to any value. Click on the up and down arrows for desired value.
The Monitor rate indicates how often LANsurveyor will send an SNMP request and wait for map object to respond, and can be set to any value. This displays the value in seconds.
The Monitor rate indicates how often LANsurveyor will send an SNMP request and wait for map object to respond, and can be set to any value. This displays the value in minutes.
The Monitor rate indicates how often LANsurveyor will send an SNMP request and wait for map object to respond, and can be set to any value. This displays the value in hours.
The Monitor rate indicates how often LANsurveyor will send an SNMP request and wait for map object to respond, and can be set to any value.
To cancel and leave Traffic Monitoring Options untouched, click here.
To save Traffic Monitoring Options changes, click here.
Enter how many "hops" to search from the given IP address range. A hop is defined as crossing one IP router in order to get to another IP network.
Select this option to search for any TCP/IP nodes that will respond to an ICMP "ping". Almost any node that has an IP address will respond to ICMP ping.
Enter the ending IP address of the range of addresses in which to search for the TCP/IP services selected above.
Enter the beginning IP address of the range of addresses in which to search for the TCP/IP services selected above.
Select this option to search for any TCP/IP nodes running the Simple Network Management Protocol (SNMP).
Select this option to search for MacOS or Windows nodes running the Netopia's Timbuktu that have been configured to respond to TCP/IP queries.
Select this option to search for MacOS or Windows nodes running the Dantz's Retrospect that have been configured to respond to TCP/IP queries.
Select this option to search for MacOS nodes running the Neon Responder that have been configured to respond to TCP/IP queries.
To select all zones in the active window, click here. Not available because the active box does not contain any zones.
To select all zones in the active window, click here.
To delete the selcted zones on the right, click here. Not available because no zones have been selected on the right.
To delete the selcted zones on the right, click here.
To add the selected zones to be searched, click here. Not available because no zones have been selected on the left.
To add the selected zones to be searched, click here.
This is the list of zones on your AppleTalk network selected for LANsurveyor to map. Select zones by clicking on it and for multiple zones, hold down the Shift key.
This is the list of zones on your AppleTalk network. Select zones by clicking on it and for multiple zones, hold down the Shift key.
To begin building a new map of the selected zones and/or IP address ranges, click here. Not available because no zones or an IP address range have been selected for mapping.
To begin building a new map of the selected zones and/or IP address ranges, click here.
Retype the same password here to confirm the accuracy of your typing.
Type the new password here. This will appear as '•' characters to enhance security. Only the first 7 characters of the password will be saved.
To cancel without changing the password, click here.
To change the Neon Responder password on the selected nodes, click here.
Type the message you would like to instantly appear on the selected nodes running the Neon Responder here.
To cancel without sending a message, click here.
To send the message to the selected nodes running the Neon Responder, click here.
Enter the serial number here. It can be found on the back of the original disk.
Enter the name of the registered owner's organization here. This may be left blank.
Enter the name of the registered owner here.
The totally cool LANsurveyor icon. What else?!?
To quit and not register this copy of LANsurveyor, click here.
To personalize this copy of LANsurveyor with the name, organization and serial number entered, click here. Not available because either the name or serial number has not been entered.
To personalize this copy of LANsurveyor with the name, organization and serial number entered, click here.
Check this box in order to be subscribed to the Neon Software Updates mailing list.
Your email address.
The country to which LANsurveyor is registered.
The ZIP or postal code to which LANsurveyor is registered.
The state or province to which LANsurveyor is registered.
The city to which LANsurveyor is registered.
The street address to which LANsurveyor is registered.
Your job title. This field may be left blank.
Don't bother me about registering my copy of LANsurveyor ever again!
Register your copy of LANsurveyor the next time you launch it.
Register your copy of LANsurveyor electronically. This sends ONLY the information contained in this dialog box to Neon Software. Not available because you have not filled out all the fields of this registration form.
Register your copy of LANsurveyor electronically. This sends ONLY the information contained in this dialog box to Neon Software.
To search other files for icons, click here.
This is the list of available icons to be associated with the selected AppleTalk service.
To cancel and not change the icon associated with the selected AppleTalk service, click here.
To save changes made with the icon associated with the selected AppleTalk service, click here. Not available because no icon has been selected.
To save changes made with the icon associated with the selected AppleTalk service, click here.
Select the type of name matching from this list. For example, select "starts with" to find running applications that begin with the text you type in the edit text field.
Type the name or partial name here. For example, typing "Navigator" would create a list of all copies of Netscape Navigator currently running on any MacOS computer.
To cancel without compiling your software meter report, click here.
To start compiling your software meter report, click here.
Select the type of software for which the report should be generated from this list.
Select the type of name matching from this list. For example, select "starts with" to find applications that begin with the text you type in the edit text field.
Type the name or partial name of software here. For example, typing "Navigator" would create a list of all copies of Netscape Navigator on any MacOS computer.
To cancel without compiling your software inventory report, click here.
To start compiling your software inventory report, click here.
Click this button to test your notification options, especially email and paging options. Sample alert messages will be recorded via email, paging and the Session Log, depending on the options selected.
Check this option if you would like to be notified of an alarm condition by having LANsurveyor send SMTP mail. Not available because TCP/IP has not been enabled on your MacOS computer.
Check this option if you would like to be notified of an alarm condition by having LANsurveyor send SMTP mail.
Check this option if you would like to be notified of an alarm condition by having LANsurveyor send a message to your pager via PageNOW!. Not available because your MacOS system does not support AppleEvents.
Check this option if you would like to be notified of an alarm condition by having LANsurveyor send a message to your pager via PageNOW!.
Check this option if you would like to be notified of an alarm condition by having LANsurveyor send electronic mail using Apple Computers's (stinking) PowerTalk mailer. Not available because PowerTalk has not been installed on this MacOS computer.
Check this option if you would like to be notified of an alarm condition by having LANsurveyor send electronic mail using Apple Computers's PowerTalk mailer.
Check this option if you like to automatically continue looking for any alarm condition detected by LANsurveyor. Not available because "Display dialog box" option is checked.
Check this option if you like to automatically continue looking for any alarm condition detected by LANsurveyor.
Check this option if you would like to be notified of an alarm condition by having LANsurveyor send electronic mail using CE Software's QuickMail product. Not available because the QuickMessanger extension was not available.
Check this option if you would like to be notified of an alarm condition by having LANsurveyor send electronic mail using CE Software's QuickMail product.
Check this option if you would like to be notified of an alarm condition by having LANsurveyor send a message to your pager via Notify!. Not available because your MacOS system does not support AppleEvents.
Check this option if you would like to be notified of an alarm condition by having LANsurveyor send a message to your pager via Notify!.
Check this option if you would like to be notified of an alarm condition by having the MacOS Sound Manager play a sound.
Check this option if you would like to be notified of an alarm condition by having LANsurveyor find and highlight the relevant map object icon and, if necessary, scroll the map to display the object.
Check this option if you would like to be notified of an alarm condition by having the LANsurveyor icon flash in the Application menu icon or the Apple menu icon only if LANsurveyor is in the background.
Check this option if you would like to be notified of an alarm condition by an entry in the Session Log, unless the "Keep looking for alarm condition" box is checked.
Check this option if you would like to be notified of an alarm condition with a display of a dialog box. Not available because "Keep looking for alarm condition" box is checked.
Check this option if you would like to be notified of an alarm condition with a display of a dialog box.
To cancel and leave Notification Options untouched, click here.
To save changes in Notification Options, click here.
To add any found objects to map objects already selected, click here.
Finds all objects that meets the selection criteria displayed here. Not available because no selections has been made.
Finds all objects that meets the selection criteria displayed here.
Select services to find here. Hold down the shift or command key for multiple selections.
Cancels find operation.
Finds the first object that meets the selection criteria displayed here. Not available because no selection has been made yet.
Finds the first object that meets the selection criteria displayed here.
This list contains a list of events, which can include Neon Responder manage operations, template reports and quick reports, scheduled for some time in the future.
Click this button to delete scheduled events. Not available because there are no events selected.
Click this button to delete the selected scheduled event(s) in the list of scheduled events.
Click this button to discard any changes in the list of scheduled events.
Click this button to save changes in the list of scheduled events.
Use this control to specify a scheduled date.
Use this control to specify a scheduled time.
Select this radio button if you want to specify a date and/or time to run the report. You might want to use this feature to run a time-consuming report during evening hours when it will not impact users.
Select this radio button if you want to run the report immediately.
Click this button to cancel without running the report.
Click this button after deciding to run the report immmediately or at a future date and/or time.
Type in the IP address for the end of the range associated with the named AppleTalk network. This address should be in dotted decimal format.
Type in the IP address for the start of the range associated with the named AppleTalk network. This address should be in dotted decimal format.
Click this button to discard changes made to this mapping.
Click this button to save changes made to this mapping.
Click here to duplicate an AppleTalk network to IP address mapping. Use this button if your network has several IP address ranges assigned to the same AppleTalk network. This button is disabled because no mapping in the list above it has been selected
Click here to duplicate an AppleTalk network to IP address mapping. Use this button if your network has several IP address ranges assigned to the same AppleTalk network.
Click here to delete an AppleTalk network to IP address mapping. This button is disabled because no mapping in the list above it has been selected.
Click here to delete an AppleTalk network to IP address mapping.
Click here to select a mapping between an AppleTalk network number or range, and an Internet (IP) address range. There will be at least one entry for each AppleTalk network on your map.
Click here to edit an AppleTalk network to IP address mapping. This button is disabled because no mapping in the list above it has been selected.
Click here to edit an AppleTalk network to IP address mapping.
Use this button to discard any changes to the AppleTalk network to IP address map.
Use this button to save any changes to the AppleTalk network to IP address map.
This is the list of report options available to be included in the Query Summary report for the selected map objects.
To cancel and not generate Query Summary reports, click here.
To begin generating the Query Summary report with the selected report options of the selected map objects, click here. Not available because no report option has been selected.
To begin generating the Query Summary report with the selected report options of the selected map objects, click here.
Enter the priority number of the selected AppleTalk service you desire here.
To cancel and leave the priority of the selected AppleTalk service untouched, click here.
To save changes made to the priority of the selected AppleTalk service, click here.
To change the Macintosh application associated with the selected AppleTalk service, click here. Not available because no service has been selected.
To change the Macintosh application associated with the selected AppleTalk service, click here.
To change the icon associated with the selected AppleTalk service, click here. Not available because no service has been selected.
To change the icon associated with the selected AppleTalk service, click here.
To change the priority of the selected AppleTalk service, click here. Not available because no service has been selected.
To change the priority of the selected AppleTalk service, click here.
This list contains an entry each for AppleTalk services discovered by LANsurveyor. Each entry has four components: the priority, icon, name and Macintosh application associated with the AppleTalk service.
To cancel and leave Service Association options untouched, click here.
To save changes made in Service Association options, click here. Not available because no changes were made.
To save changes made in Service Association options, click here.
Click here for pop-up menu to choose secondary network object labels: Nothing Extra, User Note #1-#3, and Node Address.
Click here for more esoteric drawing options.
Instruct LANsurveyor to build interim versions of network maps while LANsurveyor is searching for network objects.
Update map during searches is off. To instruct LANsurveyor to build interim versions of network maps while LANsurveyor is searching for network objects, click here. Select this item for demo purposes only.
Label Truncation to node width is off. To force LANsurveyor to shorten an object's name and any labels chosen to the width of its icon multiplied by the Node Framing percentage, click here.
Click here for pop-up menu to choose primary network object labels: Nothing Extra, User Note #1-#3, and Node Address.
LANsurveyor will orient the map objects vertically (from top to bottom.)
Vertical orientation is off. To orient the map objects from left to right, click here.
LANsurveyor will orient the map objects horizontally (from left to right.)
Horizontal orientation is off. To orient the map objects from top to bottom, click here.
This percentage allows you to place "padding" around a map object to produce visually pleasing cushion of space. The Node Framing percentage is adjusted using its horizontal scroll control.
This percentage allows you to place "padding" between levels that separate map objects to produce visually pleasing cushion of space. The Level Framing percentage is adjusted using its horizontal scroll control.
To cancel and leave drawing options untouched, click here.
To save drawing options as displayed, click here.
Enter the message you would like for LANsurveyor to send via SMTP here.
Type the email address to whom the alert message is sent, for example, ed@company.com.
Type the email address from whom the alert message is sent, for example, joe@company.com.
Type the name or IP address of your SMTP server to which to send this message. If you have Internet Config installed, this server will already be filled in.
To cancel without changing the alert SMTP data, click here.
To save the specified SMTP data for this alert, click here.
Enter the message you would like for LAnsurveyor to send via QuickMail here.
This is the list of MailCenters or recipients available, select by clicking on it and for multiple selections, hold down the Shift key.
To cancel sending QuickMail during alarm conditions, click here.
For LANsurveyor to send the QuickMail message to the selected recipient during alarm conditions, click here. Not available because more than three or no recipients has been selected.
For LANsurveyor to send the QuickMail message to the selected recipient during alarm conditions, click here.
Enter the message to be sent to alph-numeric pagers here.
These are the names available to whom page alerts can be sent.
To cancel without changing the alert page data, click here.
To save the specified paging data for this alert, click here.
These are the sounds available for playing in an alert condition. Click one to play a sample.
To cancel without changing the alert sound, click here.
To use the currently selected sound as the alert sound, click here.
When you are finished adding fields to the report template, click here.
These are the available report template fields for the category selected above. Double-click a field to add it to the report template.
Select from this list the category of information fields you want to add to the report template.
To add the currently selected field(s) to the report template, click here. Or, double-click fields to add them to the report template.
Select this option to leave currently selected map objects as highlighted and further selecting any objects associated with the specified zone.
To find all map objects associated with the given zone, click here.
Select from this list the zones for which you'd like to search.
Select from this list the type of matching you'd like.
To find the map object that contains the specified zones, click here.
To cancel without pringing the LANsurveyor map, click here.
To begin printing of the LANsurveyor map, click here.
Enter the name of the list to be created here.
To cancel and not create a new list, click here.
To create list as named, click here.
Select from this list the type of name matching you'd like.
Select from this list the map object types over which to search.
Select this option to leave currently selected map objects as highlighted and further selecting any objects with the specified name.
To find all map objects with the given name, click here.
To cancel without finding a map object, click here.
To find the specified map object, click here.
This is the name of this object. Enter the name of the object here. Disabled because name is fixed for this object.
This is the name of this object. Enter the name of the object here.
Enter the object's IP address here.
Click here to select an icon for this object. Not available because the icon for this object is fixed.
Click here to select an icon for this object.
Enter the object's name here.
To continue with the information entered, click here.
Objects connected to network segments will be staggered to accommodate the display of many objects along the segment. Unchecking this option can cause overlap of object labels.
Objects connected to network segments will be displayed at a single level along a network and can cause overlap of object labels. Checking this option will cause objects to be staggered.
Network segments will be displayed at a set width. Checking this option will cause networks to be stretched to accommodate a large number of map objects.
Network segments will be stretched to accommodate a large number of map objects. Unchecking this option will cause networks to be displayed at a set width.
To cancel and leave these options untouched, click here.
To save changes to these options, click here.
Select the AppleTalk net (range) you'd like to find from this list.
To cancel, click here.
To find and display the selected AppleTalk net, click here.
Enter the user note label for User Note #3 here.
Enter the user note label for User Note #2 here.
Enter the user note label for User Note #1 here.
To cancel and leave user notes untouched, click here.
To save changes to user notes, click here.
Selects all objects that are connected to the currently highlighted object on the map. Not available no map object has been selected.
Selects all objects that are connected to the currently highlighted object on the map.
Finds and highlights any IP or created objects and, if necessary, will scroll the map to display those end nodes. Not available because there is no map opened.
Finds and highlights any IP or created objects and, if necessary, will scroll the map to display those end nodes. All other highlighted map objects will unhighlight unless you hold down the Shift key.
Finds and highlights all AppleTalk end nodes and, if necessary, will scroll the map to display those end nodes. Not available because there is no map opened.
Finds and highlights all AppleTalk end nodes and, if necessary, will scroll the map to display those end nodes. All other highlighted map objects will unhighlight unless you hold down the Shift key.
Finds and highlights all AppleTalk routers and, if necessary, will scroll the map to display those routers. Not available because there is no map opened.
Finds and highlights all AppleTalk routers and, if necessary, will scroll the map to display those routers. All other highlighted map objects will unhighlight unless you hold down the Shift key.
Finds and highlights all AppleTalk networks and, if necessary, will scroll the map to display those network. Not available because there is no map opened.
Finds and highlights all AppleTalk networks and, if necessary, will scroll the map to display those network. All other highlighted map objects will unhighlight unless you hold down the Shift key.
Finds the next map object that meets the selection criteria. Not available because no selection criteria is defined.
Finds the next map object that meets the selection criteria.
Finds network objects which have certain AppleTalk zones associated with them. Not available because there is no map opened.
Finds network objects which have certain AppleTalk zones associated with them.
Finds network objects which have a particular name. Not available because there is no map opened.
Finds network objects which have a particular name.
Finds and highlights all network objects that register the service you select and, if necessary, will scroll the map to display those network objects. Not available because there is no map opened.
Finds and highlights all network objects that register the service you select and, if necessary, will scroll the map to display those network objects.
Finds and highlights the map object assigned an IP address you specify and, if necessary, will scroll the map to display that object. Not available because there is no map opened.
Finds and highlights the map object assigned an IP address you specify and, if necessary, will scroll the map to display that object.
Finds and highlights your AppleTalk network and, if necessary, will scroll the map to display that network. Not available because there is no map opened.
Finds and highlights your AppleTalk network and, if necessary, will scroll the map to display that network.
Finds and highlights the AppleTalk network that you select and, if necessary, will scroll the map to display that network. Not available because there is no map opened.
Finds and highlights the AppleTalk network that you select and, if necessary, will scroll the map to display that network. All other highlighted map objects will unhighlight unless you hold down the Shift key.
Navigate Menu. Use this menu to quickly find and select map objects.
Displays the map at the zoom level selected by the submenu. Not available because there is no map opened.
Displays the map at the zoom level selected by the submenu.
Hides end node network objects (MacOS computers, printers, modems, etc.) for selected nets. Not available because no network has been selected.
Hides AppleTalk end node network objects (MacOS computers, printers, modems, etc.) for selected nets.
Displays AppleTalk end nodes in the map or net window. Not available because no nets are selected.
Displays AppleTalk end nodes in the map or net window.
Displays end nodes in the map or net window. Not available because no nets are selected.
Display Menu. Use this menu to show and hide end nodes on AppleTalk networks, and to view a network map from a zoomed in or out perspective.
Displays AppleTalk end nodes in the main map window.
Add network addresses fields to the report template.
Add Neon Responder fields to the report template.
Add Timbuktu Data fields to the report template.
Add Retrospect Data fields to the report template.
Add AppleTalk Zones fields to the report template.
Add SNMP Data fields to the report template.
Add AppleShare Data fields to the report template.
Add MacOS Responder fields to the report template.
Add AppleTalk ervices fields to the report template.
Add notes fields to the report template.
Displays a wealth of data returned by the Neon Responder. Not available because map object is not running the Neon Responder.
Displays a wealth of data returned by the Neon Responder.
Displays data returned by Netopia's Timbuktu screen-sharing software. Not available because map object does not register the necessary Timbuktu AppleTalk service.
Displays data returned by Netopia's Timbuktu screen-sharing software.
Displays data returned by Dantz Development's Retrospect Client software. Not available because map object is not a Retrospect Client.
Displays data returned by Dantz Development's Retrospect Client software.
Displays the list of AppleTalk zones that are associated with that network. Not available because map object is not a AppleTalk network object.
Displays the list of AppleTalk zones that are associated with that network.
Displays the map object's SNMP data. Not available because map object is not an SNMP agent or does not have an IP address assigned to it.
Displays the map object's SNMP data, such as information about system, volumes, system and application files.
Displays AppleShare data of the map object: the machine and server names; the server icon; and whether guest access is enabled. Not available because map object is not an AppleShare server.
Displays AppleShare data of the map object: the machine and server names; the server icon; and whether guest access is enabled.
Displays the responder data of the map object, namely, the version of the System file, Finder, Printer Driver, Responder, AppleShare, AppleTalk, and ROM. Not available because map object does provide them.
Displays the responder data of the map object, namely, the version of the System file, Finder, Printer Driver, Responder, AppleShare, AppleTalk, and ROM.
Displays the four notes field for viewing or editing. Not available because map object does not provide any AppleTalk services.
Displays the name, type and AppleTalk socket of the AppleTalk service provided by the map object.
Displays the four notes field for viewing or editing.
Not available since there are no reporting features involved with the manage and control options of the Neon Responder.
Control and manage remote nodes using the buttons in the Query window.
Displays all Startup Items and their version number present on any local volume on the remote node.
Displays all font names present on any local volume on the remote node.
Displays all Extensions and their version number present on any local volume on the remote node.
Displays all Control Panels and their version number present on any local volume on the remote node.
Displays all applications and their version number present on any local volume on the remote node.
Displays information about any SCSI devices (hard disks, scanners, removable drives, etc.) on the remote node.
Displays information about the remote node's volumes (hard disk, CD-ROM, Syquest, shared disks, etc.) including capacity and free space.
Displays information about any processes (applications, INITS, Finder) running on the remote node.
Displays information about the remote node's AppleTalk and TCP/IP configuration, including IP address, Ethernet address and configuration versions.
Displays information about the remote node's machine, such as RAM installed, OS installed, AppleTalk version, and version of the Neon Responder.
Sends a message to be instantly displayed on any map objects that are running the Neon Responder. Not available since no map objects are selected that are running the Neon Responder.
Sends a message to be instantly displayed on any map objects that are running the Neon Responder.
Sends a folder to any map objects that are running the Neon Responder. Not available since no map objects are selected that are running the Neon Responder.
Sends a folder to any map objects that are running the Neon Responder. Select the folder and the destination. If the folder already exists on the selected map objects, the existing folder will be moved to the Trash.
Sends a file to any map objects that are running the Neon Responder. Not available since no map objects are selected that are running the Neon Responder.
Sends a file to any map objects that are running the Neon Responder. Select the file and the destination. If the file already exists on the selected map objects, the existing file will be moved to the Trash.
Changes the password associated with the Neon Responder on any map objects that are running the Neon Responder. Not available since no map objects are selected that are running the Neon Responder.
Changes the password associated with the Neon Responder on any map objects that are running the Neon Responder. Don't forget to change the Neon Responder password in the Network Options dialog box.
Arranges to set the clock on any map objects that are running the Neon Responder to the same value as the clock on the LANsurveyor machine. Not available since no map objects are selected that are running the Neon Responder.
Arranges to set the clock on any map objects that are running the Neon Responder to the same value as the clock on the LANsurveyor machine. Note, clocks will be synchronized independent of their time zone setting.
Arranges to restart any map objects that are running the Neon Responder. Not available since no map objects are selected that are running the Neon Responder.
Arranges to restart any map objects that are running the Neon Responder.
Arranges to shut down any map objects that are running the Neon Responder. Not available since no map objects are selected that are running the Neon Responder.
Arranges to shut down any map objects that are running the Neon Responder.
Manage Menu. Use this menu to control and manage map objects that have the Neon Responder installed. Not available since no map objects are selected that are running the Neon Responder.
Manage Menu. Use this menu to control and manage map objects that have the Neon Responder installed.
13.1 Displays a list of applications that are found on a MacOS computer. Not available because map object is not an SNMP agent or does not have an assigned IP address.
Displays a list of applications that are found on a MacOS computer.
Displays a list of files that are found in a MacOS System Folder. Not available because map object is not an SNMP agent or does not have an assigned IP address.
Displays a list of files that are found in a MacOS System Folder.
Displays information about any NuBus board in the map object. Not available because map object is not an SNMP agent or does not have an assigned IP address.
Displays information about any NuBus board in the map object.
Displays information about any volumes mounted on the map object. Not available because map object is not an SNMP agent or does not have an assigned IP address.
Displays information about any volumes mounted on the map object.
Displays information about any SCSI devices connected to a map object. Not available because map object is not an SNMP agent or does not have an assigned IP address.
Displays information about any SCSI devices connected to a map object.
Displays general information about a map object. Not available because map object is not an SNMP agent or does not have an assigned IP address.
Displays general information about a map object.
Displays information about how many AppleTalk packets have been handled by the map object. Not available because map object is not an SNMP agent or does not have an assigned IP address.
Displays the configuration information for the map object's network interface. Not available because map object does not provide that information.
Displays the configuration information for the map object's network interface.
Displays a list of Address Resolution Protocol mappings which show the mappings between IP addresses and physical network addresses, for example, Ethernet addresses.
Displays a table of IP statistics, such as IP packets received and transmitted and error counts.
Displays a list of network interfaces and statistics, such as errors, associated with each interface.
Displays generic configuration information from the system group of the Internet-standard Management Information Base (MIB). Not available.
Displays generic configuration information from the system group of the Internet-standard Management Information Base (MIB).
Send the selected file to the remote node's System Folder.
Send the selected file to the remote node's Shutdown Items Folder.
Send the selected file to the remote node's Startup Items Folder.
Send the selected file to the remote node's Preferences Folder.
Send the selected file to the remote node's Fonts Folder.
Send the selected file to the remote node's Extensions Folder.
Send the selected file to the remote node's Control Panels Folder.
Send the selected file to the remote node's Apple Menu System Folder.
Send the selected file to the remote node's Desktop.
Send the selected file to top level of the Startup volume of the remote node.
Set various map building and network searching options.
Set authentication passwords for SNMP and for communicating with the Neon Responder.
Set network timeout values for AppleTalk service lookup and for other network queries.
Find Startup Items to place in the report.
Find Fonts to place in the report.
Find Extensions to place in the report.
Find Control Panels to place in the report.
Find Application files to place in the report.
Query the Domain Name Server (DNS) configured in the MacTCP or TCP/IP Control Panel for the IP address of all selected map objects. Not available because no map objects are selected or TCP/IP is not present or disabled.
Query the Domain Name Server (DNS) configured in the MacTCP or TCP/IP Control Panel for the IP address of all selected map objects. The DNS will be queried with the name of the map object. Use Query DNS to discover the IP address of a map object.
Displays information, such as Internet address, about the currently selected map object. Use Get Info to select an icon for unidentified routers. Not available because there are no selected map objects.
Displays information, such as Internet address, about the currently selected map object. Use Get Info to select an icon for unidentified routers or IP objects.
Creates a generic user-defined map object that will be connected to all selected map objects. Use Create Object to place TCP/IP nodes on your map. Not available because no map object or objects have been selected.
Creates a generic user-defined map object that will be connected to all selected map objects. Use Create Object to place TCP/IP nodes on your map.
Move all selected map objects such that their top sides align with the topmost selected object. Not available since there are not two or more map objects selected.
Move all selected map objects such that their top sides align with the topmost selected object.
Move all selected map objects such that their left sides align with the leftmost selected object. Not available since there are not two or more map objects selected.
Move all selected map objects such that their left sides align with the leftmost selected object.
Selects all items in the currently active window. Not available because there are no items to be selected.
Selects all items in the currently active window. If this menu item is "Select Similar", selects all map objects with the same icon as the currently selected map object.
Removes the currently selected map objects. Not available because there are no selected map objects.
Removes the currently map selected objects.
Pastes copied text or template data. Not available because there is no text or template data copied.
Pastes copied text or template data.
Copies selected text or template data. Not available because there is no text or template data selected.
Copies the selected text or template data.
Removes the currently selected text or template objects. Not available because there are no selected text or template objects.
Removes the currently selected text or template objects.
Undo the last map move or alignment operation. Not available now because you have already undone a move or alignment operation or because you have not moved or aligned map objects yet.
Undo the last map move or alignment operation.
Edit Menu. Use this menu for editing portions of a network map, and polling and monitoring lists. In addition, it lets you create arbitrary map objects to represent user-defined objects on your network map.
Save the currenty active report template with another name.
Save the currenty active report template.
Opens a saved report template.
Creates a new report template.
Create a software meter report. Not available because there are no selected nodes running the Neon Responder.
Create a software meter report (running applications, INITS, etc.) by name and version for those selected nodes running the Neon Responder.
Create a software inventory report by name and version for those selected nodes running the Neon Responder. Not available becuase there are no selected nodes running the Neon Responder.
Create a software inventory report by name and version for those selected nodes running the Neon Responder.
Creates summary reports of query information. Not available because no map objects have been selected.
Creates summary reports of query information.
Creates a list of services for the objects that have been selected on the map. Not available because no map objects have been selected.
Creates a list of services for the objects that have been selected on the map.
Creates a list of objects that have been selected on the map. Not available because no map objects have been selected.
Creates a list of objects that have been selected on the map.
Use this menu to produce reports based on selected map objects.
View list by node.
View list by net.
View list by zones.
View list by names.
View list by icons.
Finds the Notify! page server that allows LANsurveyor to alert you by paging. Not available because your MacOS system does not support AppleEvents.
Finds the Notify! page server that allows LANsurveyor to alert you by paging.
Displays a list of any scheduled events, such as Neon Responder manage operations (restart, send file, etc.), template reports or quick reports. Also, delete scheduled events from this list.
Associates Internet (IP) address ranges to AppleTalk network numbers. These associations are used to import lists of IP addresses to create IP-addressable objects on your map.
Associates icons, priorities and Macintosh applications to AppleTalk services.
Displays the three user defined notes labels for viewing and editing.
Setting drawing options assist LANsurveyor in drawing a visually pleasing map.
Setting network options assists LANsurveyor in building a complete and accurate map of your network.
Options Menu. Use this menu to change network search and drawing parameters, title individual notes fields, associate icons and applications with AppleTalk services, and find a Notify! page server, if available
Displays any map object query windows, making the most recently created query window the active window. Not available because no query windows have been created.
Displays any map object query windows, making the most recently created query window the active window.
Displays and makes the LANsurveyor Report window the active window. Not available because a report has not been built.
Displays and makes the LANsurveyor Report window the active window.
Displays and makes the Session Log window the active window.
Displays and makes the LANsurveyor Map window the active window.
Creates a new SNMP traffic monitor list window.
Creates a new poll list window according to the submenu selection.
Windows Menu. Use this menu to manage the LANsurveyor windows, and to create new poll and monitor lists.
Closes LANsurveyor and returns you to the MacOS Finder. If the network map includes changes that have not been saved, an alert box will appear, giving you the opportunity to save the document.
Prints the contents of the active LANsurveyor window. Not available because the active window does not support printing.
Prints the contents of the active LANsurveyor window.
Displays the standard Page Setup dialog box. See your Macintosh owner's manual for details.
Displays or hides page break lines within the map window.
Import data from text files using the submenu.
Exports the contents of the active LANsurveyor window into a format that can be used by other Macintosh applications. Exports into a PICT format in main and net windows and TEXT in all others.
Researchs the network looking for the current map objects and adding any new map objects. Not available because there is currently no active map to be rescanned.
Researchs the network looking for the current map objects and adding any new map objects.
Verifies that each map object is still on the network. Not available because there is currently no active map to be verified.
Verifies that each map object is still on the network.
Saves the current LANsurveyor map with a new file name. Not available because there is no map to be saved.
Saves the current LANsurveyor map with a new file name.
Saves the current LANsurveyor map. If you have not saved the map since starting LANsurveyor, a dialog box will ask you to name the file. Not available because there is no map to be saved.
Saves the current LANsurveyor map. If you have not saved the map since starting LANsurveyor, a dialog box will ask you to name the file.
Closes the currently active window. If the currently active window is the Map window and you have made changes, an alert box offers you the chance to save the map. Not available because there are currently no open windows.
Closes the currently active window. If the currently active window is the Map window and you have made changes, an alert box offers you the chance to save the map.
Opens an existing map. If you choose Open Map without having saved the current map, a dialog box will prompt you to save the current map.
Add to the existing map. A dialog will prompt you to add new zones to be searched. Not available because there is currently no active map to which to be added.
Add to the existing map. A dialog will prompt you to add new zones to be searched.
Builds a new network map. If you choose New Map without having saved the current map, a dialog box will prompt you to save the current map.
File Menu. Use this menu for opening, closing, saving, verifying, and rescanning network maps. In addition, it lets you export and print the contents of almost all information and graphics presented in LANsurveyor
-
Provides information about LANsurveyor and Neon Software, Inc.
Personalization
Apple Menu
Fonts
Control Panels
Extensions
System Software
Disk Drives
SCSI Devices
Slot Devices
Monitors
Hardware
Import Service Associations and Icons from an older copy of LANsurveyor. Use this to save any icons imported or Service Associations made from a customized version of LANsurveyor.
Import a text file of IP addresses and their assigned names. Map objects will be created that correspond to the imported IP addresses and names.
Displays the map at 6.2% zoom level. This is the current zoom level.
Displays the map at 6.2% zoom level.
Displays the map at 12.5% zoom level. This is the current zoom level.
Displays the map at 12.5% zoom level.
Displays the map at 25% zoom level. This is the current zoom level.
Displays the map at 25% zoom level.
Displays the map at 50% zoom level. This is the current zoom level.
Displays the map at 50% zoom level.
Displays the map at 75% zoom level. This is the current zoom level.
Displays the map at 75% zoom level.
Displays the map at 100% zoom level. This is the current zoom level.
Displays the map at 100% zoom level.
Creates a new IP polling window. Not available because TCP/IP is not installed or configured.
Creates a new IP polling window.
Creates a new AppleTalk polling window.
Finds all objects that meet the zone selection criteria.
Limits the find to nets only.
Finds objects that do not contain the characters entered in the text box.
Finds objects which do not exactly match the characters entered in the text box.
Finds objects which exactly match the characters entered in the text box.
Finds objects that end with the characters entered in the text box.
Finds objects that start with the characters entered in the text box.
Finds objects that contain the characters entered in the text box.
Finds all objects that meet the selection criteria.
Limits find to IP nodes or objects that you have created manually only.
Finds objects that do not any of the services highlighted in the service list.
Finds only objects that register all of the services highlighted in the service list.
Finds objects that register at least one of the services highlighted in the service list.
